Clarity instead of chaos
Clear labelling and sensible circuit logic mean that during a fault, service visit or later upgrade, the consumer unit is not a puzzle but a reliable and readable foundation.
Need a new consumer unit, replacement of an old one or extra circuits? We do it so the panel is safe, clear and ready for the future — whether you are only renovating now, or later planning solar, EV charging or a heat pump.
For most homeowners, this is not about technical jargon. It is about having a consumer unit that makes sense in real life. It needs to be safe, clear, ready for the actual load in the property and not stand in the way of future expansion.
Clear labelling and sensible circuit logic mean that during a fault, service visit or later upgrade, the consumer unit is not a puzzle but a reliable and readable foundation.
We design the consumer unit to match how the property is actually used. What matters is load separation, protection and the way the panel connects to the rest of the electrical installation.
When you think ahead today, you do not need to rebuild the panel tomorrow because of extra circuits, EV charging, solar or the next stage of your renovation.
In most cases, this is not simply “a new panel,” but a specific real-world situation in the property. These are the typical moments when it makes sense to deal with the consumer unit properly.
The old consumer unit is no longer enough for new appliances, an updated kitchen, bathroom or a new circuit layout. We design the logic so the result is not a patchwork of improvisation.
Missing labels, overcrowded modules or a panel that nobody understands. We turn that chaos into a clear, reliable foundation that can still be serviced years from now.
When future technologies are considered too late, the consumer unit often gets rebuilt twice. We leave sensible reserve capacity and plan the space and logic ahead of time.
Depending on the scope, we can go from a simple replacement all the way to a consumer unit as part of a larger renovation or new installation. The perspective always stays residential: function, clarity and future usability.
For panels that are outdated, confusing or no longer match how the property is actually used today.
A clean electrical foundation for a home, apartment, garage or smaller property without future compromises.
When you do not need to rebuild everything, but you do need more capacity, better logic or improved protection.
No unnecessary technical theatre. A consumer unit should work in real life, stay readable and not make future service or later stages of the property more complicated.
A consumer unit is not just a box full of breakers. It is a part of the home that should make sense in everyday use, during servicing and whenever an inspector or another electrician needs to work with it. That is why we focus on logical circuit layout, clear labelling and clean installation.
Most people add new technologies step by step: first a renovation, then perhaps solar, EV charging, a heat pump or smarter controls. When this is considered during the design of the consumer unit, you avoid unnecessary rebuilds and duplicated costs later on.
A consumer unit is connected to design, assembly, installation and follow-up service. That is why it helps to have the option to continue to more detailed pages if you already need project-level support or want a unit built to specification. For most homeowners, though, we always start simply: what should the panel actually do, and how should it work in real life?
This page is the residential entry point. If you already need more detailed technical support or want to deal with the panel on a deeper level, you can continue to two dedicated pages below.
For situations where you need a more systematic design approach, technical logic and a better long-term plan.
For cases where you are ready to solve the actual build, assembly and handover of a custom unit.
No unnecessary back and forth. From the first contact to the final handover, you know what we are solving, why we are solving it and where the whole process is heading.
You tell us whether you need a new consumer unit, replacement of an old one or an extension. Photos of the current setup and a short description of the property are ideal.
We propose what should stay, what should change and where reserve capacity makes sense. The goal is a safe, clear result, not an overcrowded panel with no future.
You receive a clear proposal and price range based on the scope. No unnecessary technical clutter and no hidden compromises.
We build, install or modify the consumer unit according to the agreed scope. The emphasis is on clean work, proper labelling and clear circuit logic.
We explain the consumer unit in a clear, human way. Where needed, we can continue with related electrical work, more detailed design or custom manufacturing.
That depends on the age, capacity and overall condition of the panel. If the consumer unit is overcrowded, confusing or no longer matches the actual electrical load of the property, full replacement often makes sense. If the core is still usable, an upgrade or extension may be enough. After a short consultation, we will tell you honestly what is worth doing and what no longer is.
We work on apartments, family homes, garages, workshops and smaller properties as well. On the residential side, our focus is always the same: the consumer unit should match the real way the property is used and remain clear for both the homeowner and future service work.
Yes. These technologies often require additional circuits, protection devices and spare capacity inside the consumer unit. We prepare the panel so future upgrades are not improvised or unnecessarily expensive.
Yes. We care a lot about clear labelling. A consumer unit should still make sense to someone who did not install it. That helps with everyday use, troubleshooting and inspections.
Yes. That is a very common situation in older homes and apartments. We first map the real condition, then propose a safe and logical solution. The goal is to stop the panel from being a black box full of surprises.
Yes. Thinking ahead makes a lot of sense with consumer units. We leave sensible reserve capacity based on what the property may realistically need over time. That helps avoid unnecessary rebuilds during later renovation stages or when new technologies are added.
Yes. We often deal with old or confusing panels. We design a new foundation, circuit layout and protection so the final result matches the way the property is actually used today.
That depends on the scope. For smaller residential jobs, a consultation, photos and a site visit are often enough. When more detail is needed, we can continue with proper consumer unit design documentation and prepare the technical basis systematically.
Yes. A consumer unit is often not a standalone topic, but part of a wider renovation or extension of the electrical installation. We can therefore continue with related electrical work so everything functions as one coherent system.
The fastest option is to send photos of the consumer unit, a short description of the property and what is changing. Based on that, we can quickly estimate whether you mainly need an upgrade or already need a new panel and recommend the next step.
The price depends mainly on the number of circuits, the scope of the work, the protection devices used and whether it connects to other electrical work. The exact figure depends on the real scope, but after an initial consultation we can give you a clear price range and recommend the option that makes the most sense.
Primarily Ostrava, Frýdek-Místek, Havířov and nearby areas in the Moravian-Silesian Region. Other parts of the Czech Republic can be arranged depending on the scope of the project.